Skip Navigation SEARCHGLOSSARYSITE MAP HELP
PAVEMENT PRESERVATION TREATMENT CONSTRUCTION GUIDE
CHAPTER 10: ULTRA-THIN HOT MIXED ASPHALT, BONDED WEARING COURSE PROJECTS
Go back to last visited page
Printer Friendly

Chapter 10: Ultra-Thin, Hot Mixed Asphalt, Bonded Wearing Course Projects

References

  1. Strategic Highway Research Program, Distress Identification Manual for the Long-Term Pavement Performance Project, SHRP-P-338, Washington, DC, 1993.
  2. Koch Pavement Solutions brochure, Novachip Project Selection, 1998.
  3. Oliver, J., Thin Bituminous Surfacings and Desirable Road User Performance, Australian Road Research Board, Research Report AR 325 n, 1999.
  4. Commonwealth of Pennsylvania Department of Transportation, Novachip Final Report October 2002.
  5. Wonson, K., Novachip- the ultra-thin asphalt surface, Australian Asphalt Pavement Association Asphalt Review Vol 16, No1, March 1997
  6. California Department of Transportation, Route 85 Noise Mitigation Study, Santa Clara, CA, January 1998.
  7. Holleran, G., Microsurfacing, Federal Highway Administration Seminar, Jackson Hole, WY, 2001.
  8. Lobaugh, G., Performance Evaluation of NOVACHIP: Ultrathin Friction Course, Texas Transportation Institute, February 1997.
  9. Alverez, L., This Pavement Runs Hot and Cold, Asphalt Contractor, May 1992.
  10. New South Wales Department of Transportation, Guide to the Use of the Novachip System of Bituminous Surfacing, NSW Dot, 1995.
  11. Hanson, D., Construction and Performance of Ultra-thin Bonded HMA Wearing Course, National Center for Asphalt Technology, August 2000.