Skip Navigation SEARCHGLOSSARYSITE MAP HELP
PAVEMENT PRESERVATION TREATMENT CONSTRUCTION GUIDE
CHAPTER 5: CHIP SEALS
Go back to last visited page
Printer Friendly

Chapter: Chip Seals

References

  1. California Department of Transportation, Standard Specifications, Sacramento, California, 1999.
  2. California Department of Transportation, Standard Special Provisions Asphalt, S8 M20, 1999.
  3. Jannisch, D.W., Gaillard F.S., Minnesota Seal Coat Handbook: Final Report, Minnesota Department of Transportation, December 1998.
  4. Federal Highway Administration, U.S. Department of Transportation, An Overview of Surface Rehabilitation Techniques for Asphalt Pavements, FHWA-PD-92-008, Washington, D.C., 1992.
  5. South Australian Department of Transportation, Bituminous Sealing Manual, 1995.
  6. McLeod, N.W., A General Method of Design for Seal Coats and Surface Treatments, Proceedings of the Association of Asphalt Paving Technologists, Volume 38, St. Paul, Minnesota, 1969.
  7. Austroads, Design of Sprayed Seals, Surry Hills, New South Whales, Australia, 1990.
  8. California Department of Transportation, Caltrans Safety Manual, Chapter 12, Sacramento, California, 1998.
  9. California Department of Transportation, Caltrans Code of Safe Operating Practices, Chapter 12 and Appendix C, Sacramento, California, 1999.
  10. Stevenson, J., Maintenance Chip Seal Manual, Montana Department of Transportation, 1996.
  11. Holleran, G., Chip Seal Design, California Chip Seal Association Annual Meeting, January, 2001.
  12. Federal Highway Administration, U.S. Department of Transportation, Manual on Uniform Traffic Control Devices (MUTCD), Millennium Edition, Washington, D.C., 2002.
  13. TRH 3 Committee, Design of Bituminous Seals, South Africa Roads Board, 2002.
  14. The Asphalt Institute, A Basic Asphalt Emulsion Manual, Manual Series No. 19, Lexington, Kentucky, 1999.